#Plaster wall repair walmart how to#
#Plaster wall repair walmart Patch#

You have to experiment with the material to fill a textured hole in a ceiling or wall. One pass with a drywall knife (either metal or plastic) is all it takes to leave a smoothly filled surface. This will leave the most excess material.

From any holes from 3⁄16 to 3⁄4 inches across, move the Erase-A-Hole tube in a circular motion, beginning slightly outside the hole’s circumference and working toward the inside. With small holes, we found that you can simply wipe the repair compound over the hole and use a putty knife or a soft cloth to wipe away remaining residue. The material is surprisingly moist for something so cohesive, and it readily fills the hole to which you apply it. Out of the top of the tube feeds a stick (to call it that) of 1.5-inch-diameter drywall repair compound. To use it, remove the cap and turn the dial at the bottom of the tube. But it applies most smoothly and fills more consistently in holes from nail diameter to about 3⁄16 inch. We filled hole diameters with it from tiny (about the size left by a finishing nail, less than 1⁄16 inch) all the way up to 3⁄4 inches in diameter. And though it’s best for textured surfaces, it also works well on smooth ones. Limited to holes less than 3/4-inch in diameterĮrase-A-Hole is drywall repair in the form of a stick.You’ll also need more repair compound than comes with the kit. However, to blend it in with the surrounding area you’ll need a minimum of a 6-inch or an 8-inch knife. The first pass with the compound provided and the small plastic knife included will produce enough of a layer that you can sand the patched area smooth.

At this point, we let the first coat dry. To make a smoother repair, we made a second pass using a little more compound and moving the knife at approximately a 45-degree angle to the first pass. The compound spreads easily, and the knife works reasonably well, despite its small size. Per the kit’s instructions, we lightly sanded around the edge of the hole with a sponge first, then applied the screen over the hole and vertically spread the first layer of repair compound over the hole. Since you’re only working on the surface of the wall, the condition of the back side of the wall doesn’t matter. This is an effective little kit for repairing holes up to the size of one produced by a door knob.

For 3-inch holes, you’ll need a wider knife than 3M supplies.

Read on to find the best drywall repair material or kit for you. For one repair product, we learned that the condition of the back of the drywall is as important as the front. It gave us a good idea of how much filler was required to begin the repair process.

As odd as it may sound, we also inspected the back of each drywall test panel. We let the first coat of repair compound dry and evaluated the results. Next, clamping the panels upright, we applied the repair materials as the directions called for, using the drywall knife if the kit came with one. Accidental holes are rarely neat and clean. In some cases, we deliberately made the holes ugly and ragged. Depending on the size hole we wanted, we used a hole saw in a cordless drill, a hammer, a center punch, or a drywall saw. We bought a stack of 3 by 3-foot drywall repair panels and put holes in them.

#Plaster wall repair walmart how to#

For holes in the range of 3 inches to 5 inches, you need to either use a kit specifically designed to cope with large holes or you have to apply a screen and learn how to use a drywall knife. An all-in-one hole-filling applicator or a product like Erase-A-Hole works well for these the only thing you need to accompany that product is a putty knife or even a soft cloth to wipe off the excess.įor larger holes measuring from 1 to 3 inches at their widest point, kits that come with patching screens work pretty well. We found that for small drywall holes up to 3⁄4-inch, simpler materials are best.

#Plaster wall repair walmart Patch#

Best for Quick Drywall Repairs in Low Light: DAP Eclipse Repair Patch.

Best for Small Holes in Smooth Drywall: 3M All-In-One Repair Tube.

Best for Extremely Large Holes: Humbest Repair Screens.

Best for Big Holes: 3M Large Hole Repair Kit.Best for Small Holes in Textured Surfaces: Erase-A-Hole.Best for Holes Up to 3 Inches: 3M Small Hole Repair Kit.Everyone will have a hole to patch at some point. This is why we tested drywall repair kits and materials. There are many other hole makers too: people trying to move furniture and put a table leg through the wall, hollow wall anchors that wiggle loose, toggle bolts that tear free, and rambunctious kids with a little too much energy for the indoors on a rainy day. Somebody swings a door open with a little too much vigor, and its knob does a number on the adjacent wall. You hang a painting or a photo on the wall and then decide to relocate it. Sometimes they happen on purpose and sometimes by accident.